Hooker Aerator MODEL 751 - 38" FRONT-MOUNT
The JRCO Hooker Aerator is designed for the lawn care professional. It saves time and labor with high-production aeration. Aerate 66,000 square feet per hour at 5 mph.
The 38-inch wide Hooker Aerator punctures up to six holes per square foot. Holes are approximately 1/2" wide by 1-1/4" long and up to 3" deep. Tines pierce deep into the soil, hooking and lifting loose plugs of dirt that disperse quickly, spreading nutrients over the surface. No unsightly hard plugs accumulate on the lawn. The lifting action of the tines prevents soil compaction that is common with hollow tine aerators and allows good filtration of air and water into the lawn.
Each of the three caster assemblies has two floating cast iron tine rotor heads. The casters swivel, allowing turning while aerating. The six floating rotor heads independently lift over tree roots and rocks while the other heads continue to aerate.
The front-mount aerator attaches to the JRCO mount bar with two clevis pins. An electric actuator lifts the heads for transport.
Aeration Width: 38"
Aeration Pattern: 5" x 6"
Hole Size: Approx. 1/2" wide x 1.25" long, up to 3" deep
Tines: 3/8" wide x 3" long hardened high carbon alloy steel
Productivity: 1.5 acres per hour @ 5 mph (66,000 sq. ft. per hour)
Shipping Weight: 198 lbs